There are two possible reasons you might be planning for home remodeling and additions: the first one is to enhance your residence and give it more visual appeal and to make it more comfy as a location for living, and the second one is to improve the home and make it like-new again for reselling purposes.
Whatever the reason is, what is very important is that the proper steps are taken to make sure you have a quality home remodeling and additions project. Here is a guide to a better home remodeling and additions project:
1. Because embarking on a home remodeling and additions project requires a substantial quantity of money, the first thing to think about is financial resources. Think not just twice but think decisively and extensively if you are planning to take out cash or a mortgage on your residence. If the reason for the remodeling and additions is just for looks and not for resale, then it would be better not to pursue the idea and wait up until you have the right finances for the task.
2. Consider exactly what would be the reason for the home remodeling and additions. If you want your house to be resold, then the particular remodeling and additions project should be based not on exactly what you want or need but on what potential buyers want or need. Before doing the remodeling and additions project, check what the most recent designs and styles in the neighborhood are. You want your renovated house to fit the taste and style of your possible purchasers. For example, according to the folks at Capital Construction, “Having a roof color on one’s home that stands out against other homes in the neighborhood may affect its selling potential.” So, make sure you stay close to the design and style of your neighborhood.
While it might be less costly if you personally carry out the home remodeling and addition project, it is not a good idea. This is not just a simple task because there are codes or policies within your city or area that govern remodeling and additions projects. You do not want to finish your residence only to find that it is structurally unsound or doesn’t meet the building code.
As much as possible, make a design that is consistent with the home’s initial design and the residences in your community. Too much home remodeling will not yield a good return.
Roofing Replacement – What to Know
Expense and Terminology
The expense to change a roof, as you might imagine, varies. It differs according to your roofing products (all the way from cheap 3-tab asphalt shingles to architectural shingles and slate), the roofing contractor, the pitch (or steepness) of your roofing system, the area to be covered, and a host of other factors.
Usually, you’re taking a look at expenses of $5,000 or more. It is hard to imagine a whole-house roof replacement costing less. That being said, roofers have some room to negotiate on the cost, so feel free to do so.
There are a few words you will certainly need to understand.
- A “square” is a system of measurement equaling 100 square feet.
- A “vent” runs along the ridge of the roof to eliminate trapped vapor and heat, so that the roofing does not deteriorate and buckle with time.
- “Composition” is what the room is made of (e.g., asphalt shingles, slate, etc.).
Is Summer the Only Time For This?
No. Roofing contractors are remarkable – and this is why we pay them to do our roofs. I have actually seen roofing contractors right here in my extremely damp state – Washington State – skillfully shoehorn in a roofing task between rains. No, the weather does not need to be completely dry.
Any partly installed areas must be completely dry before any covering layers are set up. The trick behind “skillfully shoehorning” in the roofing job is to have a huge team of expert roofing contractors who can knock out work phases in hours, instead of days, which is another reason to think twice before doing your own roofing task.
Incredibly, a moderately-sized, professionally-installed roofing job might take only 3 or 4 days.
- Eliminate all existing shingles, deposit them in a roll-off, and remove.
- Make minor repair work on roofing if in good condition. If not, replace bad wood with plywood or 1″x6″ boards, whichever is applicable to your roofing.
- Set up ice dam defense, an obstacle of synthetic materials to prevent backed up ice in the gutters which prevents ice-melt from receding. The ice-melt will certainly penetrate under the shingles and cause damage to the inside of your house.
- Lay down asphalt paper.
- Apply the shingles – starting at the eaves and working up.
- Apply flashing around all areas where leaks might come into your home – against the chimney, stack vents, etc
- Set up the ridge vent.
Types of Metal Roofing in Texas
Metal roofing is a waterproof, pest-resistant and fire-resistant roofing alternative for houses, which can last for a full century according to home improvement professional Tim Carter of Ask the Builder. In addition, the roofing supplies an old-fashioned, timeless design that may fit your home – or individual tastes – better than modern asphalt shingles. Residential metal roofing is available in a number of types, each of which provides different advantages.
Sheet metal roofing consists of numerous long, flat sheets of metal, which contractors bind together to develop one big, interconnected surface. The approach for binding the sheets together varies depending on the particular variety of sheet metal roof you use. Two of the most common systems consist of standing seam and batten. With standing seam sheet metal roofing, the sheets have specialized edges that link into one another, forming raised seams. In contrast, with batten sheet metal roofing, contractors secure sheets together utilizing separate metal covering pieces, referred to as battens, which cover the seams.
The most common option for domestic metal shingle roofing is installing big, pre-formed panels that create the illusion of numerous individual shingles. An alternative to utilizing panels is setting up individual metal tiles, which require the attachment of each and every tile to the underlying roofing structure.
While the majority of basic contractors can set up sheet and shingle metal roofing, setting up a flat metal roofing system needs the experience of a master roofing professional, as Tim Carter reports. The roofing consists of numerous metal sheets or panels, which a roofing professional solders together and then hammers flat.
For sheet and shingle metal roofing, aluminum is a popular choice. Another popular metal roofing material is steel, which, although heavier than aluminum, is considerably tougher. Stainless steel is an alloy used in metal roofing that is unbelievably resistant to rust and corrosion.